Please use this identifier to cite or link to this item: http://hdl.handle.net/20.500.12258/14833
Full metadata record
DC FieldValueLanguage
dc.contributor.authorDevitsky, O. V.-
dc.contributor.authorДевицкий, О. В.-
dc.contributor.authorKravtsov, A. A.-
dc.contributor.authorКравцов, А. А.-
dc.contributor.authorSysoev, I. A.-
dc.contributor.authorСысоев, И. А.-
dc.date.accessioned2021-01-26T10:24:52Z-
dc.date.available2021-01-26T10:24:52Z-
dc.date.issued2020-
dc.identifier.citationDevitsky, OV; Kravtsov, AA; Pashchenko, AS; Sysoev, IA. SyInfluence of thermal annealing on the structure and optical properties of thin aluminum nitride films on sapphire // PHYSICAL AND CHEMICAL ASPECTS OF THE STUDY OF CLUSTERS NANOSTRUCTURES AND NANOMATERIALS. - 2020. - Выпуск: 12. - Стр.: 591-600ru
dc.identifier.urihttp://hdl.handle.net/20.500.12258/14833-
dc.description.abstractThe results of an experimental study of the effect of thermal annealing on the structure, surface morphology and optical properties of thin films of aluminum nitride on sapphire are presented. Thin films of aluminum nitride on sapphire with a thickness of 200 nm were annealed in air and in a nitrogen atmosphere at a residual gas pressure in the vacuum chamber of the ion-beam deposition unit of no less than 100 Pa at a temperature of 850 degrees C. It was found that thermal annealing of aluminum nitride films on sapphire in a nitrogen atmosphere leads to a decrease in the root mean square roughness of the films to 0,8 nm, an increase in the transmittance in the wavelength range of 300 -1100 nm up to 96 %, and an increase in the stoichiometry of the films. It is shown that for aluminum nitride films annealed in air on sapphire, aluminum nitride is oxidized to form amorphous aluminum oxide at a temperature of 850 degrees C. The results of energy dispersive analysis showed the complete absence of nitrogen on the surface of these films. A decrease in the transmittance over the entire wavelength range for films AIN annealed in air makes them unsuitable for use in optoelectronics. The surface morphology of these films is an array of pointed formations with a maximum height 190,7 nm and an arithmetic mean surface roughness 3,7 nmru
dc.language.isoruru
dc.publisherTVER STATE UNIVru
dc.relation.ispartofseriesPHYSICAL AND CHEMICAL ASPECTS OF THE STUDY OF CLUSTERS NANOSTRUCTURES AND NANOMATERIALS-
dc.subjectAluminum nitrideru
dc.subjectEnergy dispersive analysisru
dc.subjectIon-beam depositionru
dc.subjectThermal annealingru
dc.subjectNanoheterostructuresru
dc.subjectSapphireru
dc.subjectOptical propertiesru
dc.titleInfluence of thermal annealing on the structure and optical properties of thin aluminum nitride films on sapphireru
dc.typeСтатьяru
vkr.instИнженерный институтru
Appears in Collections:Статьи, проиндексированные в SCOPUS, WOS

Files in This Item:
File SizeFormat 
WoS 994 .pdf1.99 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.