Please use this identifier to cite or link to this item:
Title: Oxide Nanostructured Coating for Power Lines with Anti-Icing Effect
Authors: Blinov, A. V.
Блинов, А. В.
Kostyukov, D. A.
Костюков, Д. А.
Yasnaya, M. A.
Ясная, М. А.
Zvada, P. A.
Звада, П. А.
Zvezdilin, R. A.
Звездилин, Р. А.
Kravtsov, A. A.
Кравцов, А. А.
Maglakelidze, D. G.
Маглакелидзе, Д. Г.
Golik, A. B.
Голик, А. Б.
Gvozdenko, A. A.
Гвозденко, А. А.
Lazareva, N. V.
Лазарева, Н. В.
Kushch, E. N.
Кущ, Е. Н.
Kolodkin, M. A.
Колодкин, М. А.
Nagdalian, A. A.
Нагдалян, А. А.
Keywords: LabVIEW;Nanostructured coating;Overhead wires;Superhydrophobic properties
Issue Date: 2022
Publisher: MDPI
Citation: Blinov, A.V., Kostyukov, D.A., Yasnaya, M.A., Zvada, P.A., Arefeva, L.P., Varavka, V.N., Zvezdilin, R.A., Kravtsov, A.A., Maglakelidze, D.G., Golik, A.B., Gvozdenko, A.A., Lazareva, N.V., Kushch, E.N., Goncharov, V.N., Kolodkin, M.A., Shariati, M.A., Nagdalian, A.A. Oxide Nanostructured Coating for Power Lines with Anti-Icing Effect // Coatings. - 2022. - Том 12. - Выпуск 9. - Номер статьи 1346. - DOI10.3390/coatings12091346
Series/Report no.: Coatings
Abstract: This paper presents the results of the development of a technology to obtain a nanostructured coating for the protection of overhead wires and the possibility of their application in the electric power industry. The paper provides an analysis of available data on methods of combating ice in different countries, ways to protect the surface of metals from environmental influences, and new materials used for protection. We studied the possibility of using a protective nanostructured coating to protect overhead wires. A technology for obtaining a protective nanostructured coating based on silicon oxide and methods for applying it to the wire of overhead lines are proposed. The analysis of the elemental composition and surface morphology of overhead line wires with protective coating is carried out by scanning electron microscopy. The influence of the nanostructured coating on the high-frequency signal bandwidth and wire resistance using a PCIe-6351 data acquisition board, equipped with a BNC-2120 terminal module generating a frequency signal were determined using the National Instruments LabVIEW software package. The subject of the study was a 110 kV overhead power line with a protective coating developed in this work. By analyzing the calculation, we obtained the operating requirements of the developed nanostructured coating. As a result, we developed a protective coating satisfying the working conditions and investigated its properties. In the final phase of the experiment, we tested the electrical characteristics of overhead wires with the developed protective coating.
Appears in Collections:Статьи, проиндексированные в SCOPUS, WOS

Files in This Item:
File Description SizeFormat 
scopusresults 2348 .pdf
  Restricted Access
12.04 MBAdobe PDFView/Open
WoS 1465 .pdf
  Restricted Access
182.48 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.